Page 1
Instructions for opening of drawer cavity to allow convenient access for plumbing installation Remove all three drawers. To avoid the possible inconvenience of readjustment upon reinstallation, please take note and identify each drawer as the topmost, middle, and bottommost. Using a Phillips head screwdriver, remove the rear screws that secure each bar to the main frame Each bar is attached to the main frame by a single screw on the left and a single screw on the right...
Page 2
Now you have a conveniently large opening in which to complete your plumbing After the plumbing installation has been completed, please re-install the bars Re-install each bar in the same original orientation and order as in noted Step 3 Reinstall drawers. Remember to install each drawer into its original position (top, middle, and bottom position) as noted in Step 1...