Table of Contents
Advertisement
SETTING THE CONTROLS FOR
AUTOMATIC USE
This is very easy. All you have to do is work through
the steps below. The clock will work out the rest for
itself.
1 Is the electricity supply on?
2 Is the clock
showing the
To adjust turn the selector knob
correct time?
to 'Manual' then turn to 'Clock'.
Turn the setting knob in either
direction.
3 How long will
Turn the selector knob to 'Cook'.
the food take
Then turn the setting knob until
to cook?
the length of time you want the
food to cook shows in the
display. The maximum cooking
time is 10 hours. 'Auto' will show
in the display.
4 What time do
Turn the selector knob to 'Stop'.
you want the
Turn the setting knob until the
food to be
time the oven is to switch off
cooked by?
shows
cookpot (
The 'Stop' time must not be
more than 23 hours 59 minutes
from the time of day. For
example if the time of day is
9.00 am the latest 'Stop' time will
be 8.59 am the next day.
5 Set to
Turn the selector knob to 'Auto'.
automatic.
6 Turn on the
Turn the oven control to the
oven control.
correct temperature setting.
The time shown on the right gives an example of
setting the automatic controls when the time is 9.00
am, the food is to be cooked for 2½ hours and the
food is needed at 6.00 pm (1800 hours).
The clock will work out what time the oven will
switch itself on and it will turn the oven off at the end.
Once the automatic sequence is finished there will be
an alarm to remind you that you need to set the oven
for manual operation. To do this turn the selector
knob to 'Manual'. Turn off the oven control.
If you change your mind and want to cancel a
programme that you have set simply turn to 'Clock'
and then to 'Manual'.
in
the
display.
The
) will go out.
13
Advertisement
Table of Contents
