Breville Hot Cup Instructions For Use Manual page 6

Cleaning
Always switch off and unplug your Hot Cup and allow it to completely cool
before cleaning. Never immerse the base unit, power cord or plug in water or
any other liquid. Do not use harsh abrasives, chemicals or oven cleaners.
Emptying your Hot Cup
1. After your Hot Cup has completely cooled down, unplug it from the mains supply
socket.
2. Press the lid release button.
3. Hold your Hot Cup sideways over a sink.
4. Then, tip your Hot Cup upside down.
5. Still holding your Hot Cup over the sink, turn it the right side up and allow any
water to drain out of the dispensing nozzle.
6. Repeat steps 3, 4 and 5 until the water has been emptied from your Hot Cup.
If your Hot Cup will not be used for an extended period (e.g. if you are on holiday), we
recommend that you first empty it. Before using your Hot Cup again, carry out several
boil cycles discarding the water each time.
Cleaning
Clean the exterior surface of the kettle with a damp cloth and then polish with a soft dry
cloth. Do not use steel wool pads or harsh/abrasive cleaners.