Advertisement
3
As depicted in the picture the 4 iron bed
supporters are screwed into the xed
guardrail and embedded nut in front
guardrail. (attention: Please ensure that
the supporters are attached rmly to
prevent the bed from falling)
5
Fold up the extension headboard and
front frame. The extension headboard
should be attached rmly using the
Rotary bolt M6*40. The Bed board should
be assembled using the bolt M6*40.Push
the caster wheels into the receiving
cylinder of the leg to attach them rmly
in place
Cradle Assembly
front frame and back
frame + bed board for cradle
left side
frame
M6*35x4 screw
4
Place the bed board on the4 iron bed
supporters and keep it at and steady
6
As shown in the picture assemble the 3
tiered shelf with 12 nos M6*35 bolts.
Then assemble the shelf and xed side
frame with 4nos M6*40 bolts
right side frame
for cradle
M6*35 bolt
Cradle Assembly Steps:
1. Assemble the cradle with 8nos M6*35
hex socket bolts as shown in the picture
2. Fix the cradle on the guardrail for as
shown in the picture
To Assemble The Mosquito Net
How To Lengthen The Cot And Use The Side Rail
Picture A
Picture B
As shown in the picture on the left, use 2nos
M6*28 rotary bolts to pass through the 2 holes
of the mosquito net rod and x in the
corresponding embedded nut which is in the
middle vertical bar on the reverse side of the
xed guardrail. Fix the mosquito net loop into
the tip of the mosquito net rod and open the
mosquito net to cover the cot.
Open the front guard rail:
Turn the connector to the horizontal position
to drop the movable guard rail (please note:
that movable guard rail is part of the front
guard rail). When the movable guard rail is
opened the baby cot can be combined with
the adult bed.
To lock the Guard Rail:
Do the above steps in reverse sequence to
nish locking the front guard rail.
Lengthen the Cot:
First open the movable rail as per the process
outlined above. As depicted in picture A,
remove the rotary bolt used for xing the
extension head-board. Lay down the
extension head-board to nish increasing the
size of the cot as shown in picture B.
Fold back the lengthened Cot:
Do the above steps in reverse sequence to fold
back the lengthened cot to its previous size.
Advertisement
