J300 Working Instructions - mechanical
3.16 Speaker Dust Mesh
REMOVAL
Follow the Removal instructions of section 3.1
Remove the old speaker dust mesh with the tweezers.
If the frame is removed, the speaker dust mesh can easily
be removed by pushing through the speaker hole from the
opposite side of the frame.
ASSEMBLY
Remove adhesive remains from the frame!
Attach a new speaker dust mesh by using tweezers or
your fingers.
Follow the Assembly instructions of section 3.1
3.17 Frame ass'y
REMOVAL & ASSEMBLY
Follow the Removal instructions of sections 3.1 – 3.4 &
3.12 – 3.15
Replace the frame.
Follow the Assembly instructions of sections 3.15 – 3.12 &
3.4 – 3.1
3/00021-1/FEA 209 544/92 A
23(27)
Company Internal
Sony Ericsson Mobile Communications AB