Connecting Your Equipment
TV with Terrestrial Antenna
1. Connect one end of RCA/Cinch cable to the RCA/
Cinch jack on the back of the STB and the other
end to a RCA/Cinch jack on your TV. If your TV
doesn't have a RCA/Cinch jack, connect one end
of RF cable to the TV OUT on the back of the
STB and the other end to a RF input jack on your TV.
2. Connect one end of RF cable to the ANT IN on
the back of the STB and the other end to a
terrestrial antenna connection or the jack for
the public antenna on the wall.
3. Finally connect the coaxial cable from the CATV
line to the ANT jack on back of the STB.
Front Panel Display Message
KEY & DISPLAY
The message of the 7-segment LED (Light-Emitting Diode) on the STB
and keys are explained as below.
Standby Mode
System Booting
Power Off
MICOM Version
Boot Loader Version
Download
Down Load Procedure
Current Program Number on TV List
Current Program Number on Radio List
TV Mode
STB Mode
Upgrade
Upgrade Procedure
Upgrade Complete
DIGITAL TERRESTRIAL RECEIVER
11