Table of Contents
Advertisement
Connecting the DVD drive
The DVD drive has the following connectors at the rear side:
1 = Analog audio line output (LINE OUT)
2 = SCSI interface
Connecting SCSI cable and power supply cable
Plug the 50-pin SCSI cable into the SCSI interface of the DVD drive (1).
The plug is coded so that it cannot be plugged in incorrectly.
Plug the 4-pin power supply plug into the power supply socket of the DVD drive (2).
A26361-H467-Z100-1-7419
3
2
1
3 = Power supply connector
2
1
DVD-ROM drive
English - 5
Advertisement
Table of Contents
