Charging A Mobile Device (Qi) - Yamaha TSX-B237 Owner's Manual

Charging a mobile device (Qi)

A mobile device with the Qi icon can be charged with this unit. For more information
regarding the Qi charging function, see documentation provided with your mobile
device.
The Qi charging function is not available in any of the following situations:
The unit is in eco standby mode.
The Qi function is disabled.
Charge in Standby setting is disabled ( p. 33) and the unit is in standby mode.
Place the mobile device with its Qi icon facing down on the unit's Qi
icon.
Do not place metallic objects, such as straps with metal components,
near the Qi icon. Failure to observe this precaution may result in a fire,
burn, or other injury.
Charging status can be confirmed using the Qi charging indicator.
Charging possible
Charging in progress
Charging complete
The indicator may not change to the charging complete indicator with
some devices, even when they are fully charged.
Charging failed
Be sure that no other objects are positioned near the Qi icon. If you have
confirmed that nothing is interfering with Qi function, see
"Troubleshooting" for more information ( p. 37).
If charging does not begin, remove the device and place it on the Qi icon again.
Remove any cover or case attached to the mobile device while charging. If a magnetic card or
smart card is positioned between the unit and the mobile device during charging, the
magnetic stripe or radio-frequency identification (RFID) chip used on some credit cards or
passports may be damaged.
Charging may take longer at high ambient temperatures.
If vibrations generated by audio output cause the mobile device to move, position the non-
skid pad (supplied) with the rough surface upward between the mobile device and the unit.
30
Useful features