Advertisement
37ZEA6000.fm Page 14 Friday, April 12, 2019 2:27 PM
Air Index
(Models certified for sale in California)
An Air Index Information label is applied to engines certified to an
emission durability time period in accordance with the
requirements of the California Air Resources Board.
The bar graph is intended to provide you, our customer, the
ability to compare the emissions performance of available
engines. The lower the Air Index, the less pollution.
The durability description is intended to provide you with
information relating to the engine's emission durability period.
The descriptive term indicates the useful life period for the
engine's emission control system. See your Emission Control
System Warranty for additional information.
Descriptive Term
Applicable to Emissions Durability Period
Moderate
50 hours (0–80 cc, inclusive)
125 hours (greater than 80 cc)
Intermediate
125 hours (0–80 cc, inclusive)
250 hours (greater than 80 cc)
Extended
300 hours (0–80 cc, inclusive)
500 hours (greater than 80 cc)
1,000 hours (225 cc and greater)
The Air Index Information hang tag/label must remain on the
engine until it is sold. Remove the hang tag before operating the
engine.
Specifications
iGX700 (TXA-2 Type)
Length×Width×Height
Dry mass [weight]
Engine type
Displacement
[Bore×Stroke]
[78.0×72.0 mm (3.07×2.83 in)]
Net power
16.5 kW (22.4 PS, 22.1 bhp)
(in accordance with SAE J1349*)
Max. Net torque
48.3 N∙m (4.93 kgf∙m, 35.6 lbf∙ft)
(in accordance with SAE J1349*)
Engine oil capacity
Without oil filter replacement:
1.5 L (1.6 US qt, 1.3 lmp qt)
With oil filter replacement:
1.7 L (1.8 US qt, 1.5 lmp qt)
Cooling system
Ignition system
PTO shaft rotation
Counterclockwise (from PTO end)
* The power rating of the engine indicated in this document is
the net power output tested on a production engine for the
engine model and measured in accordance with SAE J1349 at
-1
3,600 min
(rpm) (Net Power) and at 2,500 min
Net Torque).
Mass production engines may vary from this value.
Actual power output for the engine installed in the final
machine will vary depending on numerous factors, including
the operating speed of the engine in application, environmental
conditions, maintenance, and other variables.
14
429×483×438 mm
(16.9×19.0×17.2 in)
47.1 kg (103.8 lbs)
4-stroke, overhead valve,
2 cylinders (90° V-Twin)
3
688.0 cm
(41.97 cu-in)
-1
at 3,600 min
(rpm)
-1
at 2,500 min
(rpm)
Forced air
Full transistorized ignition
-1
(rpm) (Max.
Tuneup Specifications
ITEM
SPECIFICATION
Spark plug gap
0.7–0.8 mm
(0.028–0.031 in)
Valve clearance
IN: 0.20±0.02 mm
(cold)
EX: 0.20±0.02 mm
Other
No other adjustments needed.
specifications
Quick Reference Information
Fuel
Unleaded gasoline (Refer to page 6).
U.S.
Except
U.S.
Engine oil
SAE 10W-30, API SJ or later, for general use.
Refer to page 7.
Spark plug
BPR5ES (NGK)
Maintenance Before each use:
• Check engine oil level. Refer to page 7.
• Check air filter. Refer to page 8.
First 20 hours:
Change engine oil. Refer to page 7.
Subsequent:
Refer to the maintenance schedule on page 6.
ENGLISH
MAINTENANCE
Refer to page 9
See your servicing
dealer
Pump octane rating 86 or higher
Research octane rating 91 or higher
Pump octane rating 86 or higher
Advertisement
