Dyson pure cool DP04 Operating Manual page 21

4
x2
x2
Push the new glass HEPA filters
into the shrouds until secure.
x2
5
clik
click
Push the shrouds until they click back
into position in the base.
6
Plug the appliance in to the mains
electricity supply and switch on.
Important
7
5
sec
Press and hold the Night mode
button on the remote control.
The display on the appliance will
countdown from five, finishing with
the default screen. The glass HEPA
filter level will be reset and the
appliance is ready to use.
21