Advertisement
fig.1
fig.3
fig.4
6. trouBlesHootInG
Problem
Vacuum does not work.
Vacuum cleaner is connected to the adaptor,
but the battery is not charged.
the vacuum only works for a short time.
the efficiency decreases or the motor
vibrates.
© Jack sealey limited
Possible cause
Battery is empty.
dust container is full.
Power adaptor is not connected to the power
supply.
the on/off switch is set to the on position.
the battery is not fully charged.
the nozzle is blocked or the filter is blocked
by fine dust.
Original Language Version
fig.2
solution
charge battery.
empty dust container.
connect adaptor to a suitable outlet.
slide it to the off position.
charge the battery.
check the nozzle opening or clean/replace
the filter.
cPV72| issue 3 15/06/16
Advertisement
