Table of Contents
Advertisement
Installation of Indoor, Outdoor Unit
5. Fit the corner covers.
6. Open two screws of control panel cover.
7. Connect one display connector and two
vane control connectors of front panel to
indoor unit PCB.
The position marking on PCB is as:
Display connector : CN-DISP
Vane control connector: CN-VANE 1,2
8. Close the cover for control box.
9. Fit the link on the panel as shown in
picture. (The link is included in the front
panel unit box.)
10. Attach the other side of link on the filter
guide of inlet grille. Install the air inlet
grille and filter on the panel.
26 Air Conditioner
CN VANE 1,2
Link
Link
Filter
guide
Screw
CN DISP
Advertisement
Table of Contents
