R for Rabbit Hide & Seek Instruction Manual

care
Safety
Be aware of the risk of open re and other sources of heat, such as electric bar
res, gase res etc. in the vicinity of the cot.
Do not leave anything in the cot, such as toys, or place the cot close to another
product, which could provide a foothold or present a danger of su ocation or
strangulation, e.g. strings, blind/ curtain cords etc.
Do not use more than one mattress in the cot.
The depth of the mattress should not reduce the side height above it to less than
500mm.
Keep your travel cot away from trailing cords or exes.
The cot is ready to use only when all locking mechanisms are engaged. Always
check that the rails are fully engaged before use.
To prevent enjuiry from falls, if the child can stand unaided or is able to climb out
of the cot, the cot shall no longer be used for that child.
Do not allow young children to play unsupervised in the vicinity of the travel cot.
For correct and safe tting of a mattress to be used with this product, the
mattress must be maximum 980mm in length and 670mm in width, and minimum
950mm in length and 640mm in width.
This travel cot complies with EN 716-1:2008+A1:2013.
Maintenance
All assembly ttings should always be tightened properly and ttings should be
checked regularly and retightened as necessary. Do not use this product if any
part is broken, torn or missing and use only spares provided by the manufacturer.
Cleaning
To clean the mattress base and travel cot fabric, wipe using a mild detergent
and water. Never clean with abrasive, ammonia based, bleach based or spirit
type cleaners. The product must be dried thoroughly before use or storage.
Designed and Imported by
R for Rabbit Baby Products Pvt Ltd.
A1-305, Palladium, Near Makarba Crossing,
Makarba,
Ahmedabad, Gujarat, 380051
India
Customer care: +91-79-30447126
Email: sales@rforrabbit.com
Hide & Seek – The Portable Baby Cot
IMPORTANT: KEEP FOR FUTURE REFERENCE. READ CAREFULLY.
Instruction Manual