Download Print this page
Pyle Nutrichef PKPC120 User Manual

Pyle Nutrichef PKPC120 User Manual

Sous-vide immersion circulator, precision cooker

Advertisement

Quick Links

by
PKPC120
Sous-Vide Immersion Circulator
Precision Cooker

Advertisement

loading

Summary of Contents for Pyle Nutrichef PKPC120

  • Page 1 PKPC120 Sous-Vide Immersion Circulator Precision Cooker...
  • Page 2: Important Safeguards

    IMPORTANT SAFEGUARDS When using electrical appliances basic safety precautions should always be followed including the following: READ ALL INSTRUCTIONS CAREFULLY BEFORE USE • Do not touch the hot surface and water. Use handles or knobs. Use this circulator for only intended use of food preparation. •...
  • Page 3 SAVE THESE INSTRUCTIONS • DO NOT use an extension cord with this product. • Operate appliance in water only. Keep the water level between the “Min” and “Max” levels indicated. Do not use appliance for other than intended purposes. • Keep the appliance dry. Never operate the appliance unless the water level is between the indicated “Min”...
  • Page 4: Operation

    OPERATION 1. Clip the PKPC120 securely inside any deep heat-proof container without touching the very bottom. FILL THE CONTAINER WITH WATER. Fill the water container with water using the water level indicator. The water level should be between the min and max indicated on the front of the circulator.
  • Page 5 Quickly press one time to set hour. Press two times to set the minutes. When the hour or minute is flashing on the display, you can turn the dial to adjust it. The set temp can be adjusted any time except when the display set time is flashing.
  • Page 6: Troubleshooting

    4. Cooking your food. Press and hold the power button one time to begin heating and circulating the water, put the food into the container when the temperature reached your temperature setting 5. When the water temperature reached the temperature setting. The appliance will make a sound every three seconds to indicate that you can now immerse your food.
  • Page 7 • Turn off the machine and keep the right water level. Restart the machine. The Led display screen reads error code: E02. • The digital thermostat is broken. Contact the customer support. CLEANING With frequent use, descaling should be done every month or more often in regions with hard water.