Connecting Example: Computers - Panasonic PT-VMZ50 Operating Instructions Manual

Connecting example: Computers

USB Memory
Attention
f When connecting the projector to a computer or an external device, use the power cord supplied with each device and commercially
available shielded cables.
Note
f For the HDMI cable, use an HDMI High Speed cable that conforms to the HDMI standards. In addition, when 4K video signal is to be input,
please use HDMI cable that is compatible with 4K video signal. Images may be disrupted or may not be projected when a video signal
exceeding the supported transmission speed of the HDMI cable is input.
f If you operate the projector using the computer with the resume feature (last memory), you may have to reset the resume feature to operate
the projector.
f To output the signal input to the <COMPUTER 1 IN> terminal from the <COMPUTER 2 IN/1 OUT> terminal, set the [PROJECTOR SETUP] menu
→ [COMPUTER2 SELECT] to [COMPUTER1 OUT].
38 - ENGLISH
Chapter 2 Getting Started - Connecting
Computer
Computer
Control computer
Control computer