Things To Do For The First Time - JVC LT-19DA1BJ Instructions Manual

THINGS TO DO FOR THE FIRST TIME

Attaching the stand
You need to attach the stand to the unit to display upright. Make sure the front and rear of the stand match the proper direction.
1) Place the unit face down onto
the soft stuff such as a cloth on a
table. Be careful not to damage
the TV screen.
To remove the stand from the unit
Pull the stand toward the direction B pressing the hooks A at once and
remove the stand from the unit slowly. Be careful not to drop the stand
when you remove it.
Note:
• Make sure to use the table which can support the weight and size of the unit.
• Make sure the table is in a stable location.
Handling the glossy finish of the unit
Be careful when handling the glossy finish of the unit. The glossy finish of the unit scratches easily.
• Protection films have been pasted onto the glossy finish of the
unit to prevent scratches. Peel off the films after the unit has
been placed properly.
• If the glossy finish gets dirty, clear the dust off the glossy finish
first. Then wipe softly with soft cloth. If you do not clear the
dust first, or you wipe the glossy finish too hard, the glossy finish
may be scratched.
EN
2) Insert the stand all the way to
the unit slowly. Be careful not to
put the AC cord between the
stand and the unit.
4
3) Make sure the stand clicks.
A
B
A
Glossy finish