Copying Files; Using A Dvd Burner To Copy Files From The Camcorder - JVC GZ-MS100E Series Instructions Manual

Copying Files

Types of Copying and Connectable Device
Using a DVD Burner to Copy Files
from the Camcorder
Supported discs: 12cm DVD-R, DVD-RW
•
Regarding DVD-R discs, only unused DVD-R
discs can be used. Regarding DVD-RW
discs, used DVD-RW discs can also be
used, but they need to be formatted before
recording. Formatting a disc deletes all
content recorded on the disc up until that
time.
•
Dual-layer discs cannot be used.
Regarding finalisation after copying
The disc is automatically finalised so that
it can be played on other devices. After
finalising, the disc is a play-only disc, so no
more files can be added.
Connection with a DVD Burner
Preparation:
Close the LCD monitor to turn off the
camcorder.

DVD Burner
(CU-VD3)
You can copy video files
recorded on this camcorder
onto DVD discs. ( right
column)
PC
You can copy video/
still image files on this
camcorder onto your PC.
( pg. 25 to 30)
To AC Outlet
USB Jack
DVD Burner
NOTES
•
When using the optional DVD Burner, read
its instructions.
•
Use the USB cable that came with the
DVD burner.
•
It is recommended to use the AC Adapter
as the power supply instead of the battery
pack.
Copying Video Files that Have Never
Been Copied
Files that have never been copied to the DVD
discs are automatically selected and copied.
1
Open the LCD monitor to turn on the
camcorder.
2
Press the DIRECT DVD button.
3
Select [EXECUTE].
•
The DVD disc begins to be created.
When [COMPLETED] appears, touch
the OK button.
•
When [COMPLETED. CHANGE DISC]
appears, change the disc. The second
DVD disc begins to be created.
•
To cancel the DVD creation, select
[STOP].
L
To quit the screen
1) Select [QUIT].
2) When [QUIT?] appears, select [YES].
AC Adapter
DC Jack
USB Jack
USB Cable