Removing the armature ..................... 37 Removing the gearbox housing ....................39 C-SC_CSSM Version 1.0 11.02.2019 Page 2 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Page 3
Fitting the carbon brushes ......................84 Setting the guide ........................85 C-SC_CSSM Version 1.0 11.02.2019 Page 3 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Page 4
Metal core drilling Contents 10 Inspection following repairs ......................88 C-SC_CSSM Version 1.0 11.02.2019 Page 4 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
JMU 137 PQW 7 270 73 ..C-SC_CSSM Version 1.0 11.02.2019 Page 5 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Up-to-date test data for all devices can be found in the FEIN electronic information system. Special tools, lubricants and auxiliary substances The special tools catalogue and the lubricants and container sizes available from FEIN can be found in the FEIN electronic information system.
Part of the navigation interface. C-SC_CSSM Version 1.0 11.02.2019 Page 7 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
C. & E. Fein GmbH assumes no responsibility for the completeness, relevance, quality or correctness of the information provided. Liability claims against C. & E. Fein GmbH that relate to material or immaterial damage caused by the use or failure to use the information provided or by the use of incorrect or incomplete information are excluded.
Measure that must be taken in order to avoid this danger. C-SC_CSSM Version 1.0 11.02.2019 Page 9 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Page 10
NFORMATION C-SC_CSSM Version 1.0 11.02.2019 Page 10 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
42 mm outer diameter Torque wrench with hexagon socket 2.5 mm fixture C-SC_CSSM Version 1.0 11.02.2019 Page 11 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Grease 0 401 18 0300 9 45 g Gearbox C-SC_CSSM Version 1.0 11.02.2019 Page 12 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Test and diagnostics options Test and diagnostics options Not currently available. C-SC_CSSM Version 1.0 11.02.2019 Page 13 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Repeat steps 1 to 5 on the opposite side of the machine. C-SC_CSSM Version 1.0 11.02.2019 Page 14 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Remove the hose (2) from the hose socket. Photo shows similar product C-SC_CSSM Version 1.0 11.02.2019 Page 15 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Unscrew the three screws (6). Remove the electronics (7). Remove the plug (8). C-SC_CSSM Version 1.0 11.02.2019 Page 16 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Unscrew the two levers (3). Photo shows similar product C-SC_CSSM Version 1.0 11.02.2019 Page 17 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Page 18
Photo shows similar product Remove the pressure piece (2). C-SC_CSSM Version 1.0 11.02.2019 Page 18 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Unscrew the four screws (1). Remove the magnetic foot (2). C-SC_CSSM Version 1.0 11.02.2019 Page 19 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Remove the sensor (3). Remove the hose (4). C-SC_CSSM Version 1.0 11.02.2019 Page 20 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Page 21
Turn the screw anticlockwise. Pull out the lever (5). 10° C-SC_CSSM Version 1.0 11.02.2019 Page 21 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Steps that must be completed: Removing the electronics Remove the sealing ring (1). C-SC_CSSM Version 1.0 11.02.2019 Page 22 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Unscrew the screw (2). Unscrew the flat headed screw (3). C-SC_CSSM Version 1.0 11.02.2019 Page 23 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Page 24
Remove the leaf spring (2). Unscrew the six set screws (3). C-SC_CSSM Version 1.0 11.02.2019 Page 24 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Page 25
Remove the two guide strips. Remove the pressure piece (2). C-SC_CSSM Version 1.0 11.02.2019 Page 25 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Repeat step 3 on the opposite side of the machine. C-SC_CSSM Version 1.0 11.02.2019 Page 26 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Remove the scale (3). Unscrew the three handles (4). C-SC_CSSM Version 1.0 11.02.2019 Page 27 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Photo shows similar product Remove the protective hose (5). C-SC_CSSM Version 1.0 11.02.2019 Page 28 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Remove switch insert (3). Pull off the plug (4). C-SC_CSSM Version 1.0 11.02.2019 Page 29 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Page 30
Open the lock (1). Disconnect the ribbon cable (2). C-SC_CSSM Version 1.0 11.02.2019 Page 30 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Unscrew the four screws (1). Remove the gearbox housing (2). C-SC_CSSM Version 1.0 11.02.2019 Page 31 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Removing the gearbox housing Remove the intermediate gearbox (1). C-SC_CSSM Version 1.0 11.02.2019 Page 32 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Unscrew the five screws (2). Remove the motor housing (3). C-SC_CSSM Version 1.0 11.02.2019 Page 33 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Remove the felt piece (2). Remove the connecting piece (3). C-SC_CSSM Version 1.0 11.02.2019 Page 34 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Removing the intermediate gearbox Removing the housing Remove the stator (1). C-SC_CSSM Version 1.0 11.02.2019 Page 35 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Removing the housing Removing the stator Remove the electronics (1). C-SC_CSSM Version 1.0 11.02.2019 Page 36 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Chuck cone 19 mm Press out the armature (1). C-SC_CSSM Version 1.0 11.02.2019 Page 37 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Page 38
Remove the magnet (5). Pull off the grooved ball bearing (6). C-SC_CSSM Version 1.0 11.02.2019 Page 38 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Remove the circlip (1). Remove the sleeve (2). Remove the spring (3). C-SC_CSSM Version 1.0 11.02.2019 Page 39 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Page 40
8.5.1 Removing the holder Remove the sleeve (1). Remove the bush (2). C-SC_CSSM Version 1.0 11.02.2019 Page 40 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Page 41
Remove the four balls (1). Remove the circlip (2). Remove the disc (3). C-SC_CSSM Version 1.0 11.02.2019 Page 41 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Page 42
Remove the plunger (1). Remove the spiral spring (2). C-SC_CSSM Version 1.0 11.02.2019 Page 42 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Remove the circlip (5). Remove the gear-wheel (6). Remove the gear-wheel (7). C-SC_CSSM Version 1.0 11.02.2019 Page 43 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Page 44
8.5.2 Removing the gearbox parts Remove the two grooved ball bearings (1). C-SC_CSSM Version 1.0 11.02.2019 Page 44 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Press down on the gear-wheel (1). Press down on the gear-wheel (2). C-SC_CSSM Version 1.0 11.02.2019 Page 45 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Remove the circlip (1). Press out the shaft (3). C-SC_CSSM Version 1.0 11.02.2019 Page 46 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Remove the circlip (1). Press down on the grooved ball bearing (2). C-SC_CSSM Version 1.0 11.02.2019 Page 47 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Press on the grooved ball bearing (2). Fit the circlip (1). C-SC_CSSM Version 1.0 11.02.2019 Page 48 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Fit the sleeve (3). Press in the shaft (4). C-SC_CSSM Version 1.0 11.02.2019 Page 49 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Page 50
Fitting 9.1.2 Positioning the shaft Fit the circlip (1). C-SC_CSSM Version 1.0 11.02.2019 Page 50 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Press the gear-wheel [z=43] onto the toothed shaft [z=11] (2). C-SC_CSSM Version 1.0 11.02.2019 Page 51 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Insert the gear-wheel (3). Fit the circlip (4). Insert the gear-wheel (5). C-SC_CSSM Version 1.0 11.02.2019 Page 52 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Page 53
Position the seal (2). Fill the gearbox with 45 g grease. C-SC_CSSM Version 1.0 11.02.2019 Page 53 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Position the spiral spring (1). Position the plunger (2). C-SC_CSSM Version 1.0 11.02.2019 Page 54 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Page 55
Apply a layer of grease to the four balls (3). Position the four balls (3). C-SC_CSSM Version 1.0 11.02.2019 Page 55 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Page 56
9.1.5 Fitting the holder Position the bush (1). Position the sleeve (2). C-SC_CSSM Version 1.0 11.02.2019 Page 56 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Page 57
Position the spring (1). Position the sleeve (2). Fit the circlip (3). C-SC_CSSM Version 1.0 11.02.2019 Page 57 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Position the sealing ring (3). Press on the grooved ball bearing (4). C-SC_CSSM Version 1.0 11.02.2019 Page 58 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Page 59
Position the sealing ring (1). Press in the armature (2). C-SC_CSSM Version 1.0 11.02.2019 Page 59 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Page 60
9.2.1 Fitting the armature Press on the magnet (1). C-SC_CSSM Version 1.0 11.02.2019 Page 60 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Route the cables as shown in the connection diagram. C-SC_CSSM Version 1.0 11.02.2019 Page 61 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Position the stator (3) in the opening (1) in the correct position. C-SC_CSSM Version 1.0 11.02.2019 Page 62 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Position the connectors in the respective opening. Position the felt piece (4). C-SC_CSSM Version 1.0 11.02.2019 Page 63 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Screw in the five screws (2). Position the air guide ring (3). C-SC_CSSM Version 1.0 11.02.2019 Page 64 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Fitting the connecting piece Fitting the housing Position the intermediate gearbox (1). C-SC_CSSM Version 1.0 11.02.2019 Page 65 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Place the gearbox housing (1) on the drill motor. Screw in the four screws (2). C-SC_CSSM Version 1.0 11.02.2019 Page 66 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Position the plug (3). Position the switch insert (4). C-SC_CSSM Version 1.0 11.02.2019 Page 67 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Page 68
±0.3 Nm Screw in the two screws (2) [2.0 Nm C-SC_CSSM Version 1.0 11.02.2019 Page 68 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Screw in the cylinder head screw (5) [8.0 Nm C-SC_CSSM Version 1.0 11.02.2019 Page 69 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Repeat step 1 on the opposite side of the machine. Position the spider (2). Fit the circlip (3). C-SC_CSSM Version 1.0 11.02.2019 Page 70 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Position the guide strip (2) and press it onto the housing. Insert the six cylinder head screws. C-SC_CSSM Version 1.0 11.02.2019 Page 71 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Page 72
±0.15 Nm Screw in the screw (4) [1.1 Nm C-SC_CSSM Version 1.0 11.02.2019 Page 72 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Page 73
±0.3 Nm Screw in the screw (4) [3.0 Nm C-SC_CSSM Version 1.0 11.02.2019 Page 73 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Grease the sealing ring (1). Position the sealing ring (1). C-SC_CSSM Version 1.0 11.02.2019 Page 74 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Turn to the "30%" position. Position the lever (3). C-SC_CSSM Version 1.0 11.02.2019 Page 75 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Page 76
Position the sealing ring (2). Insert the sensor into the hose (3). C-SC_CSSM Version 1.0 11.02.2019 Page 76 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Page 77
Screw in the two screws (4) with circlip [0.7 Nm ±0.1 Nm]. Photo shows similar product C-SC_CSSM Version 1.0 11.02.2019 Page 77 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
±0.5 Nm Screw in the four screws (2) [8.0 Nm C-SC_CSSM Version 1.0 11.02.2019 Page 78 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Screw in the two levers (3). Photo shows similar product C-SC_CSSM Version 1.0 11.02.2019 Page 79 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Page 80
Fit the protective hose (2). Photo shows similar product C-SC_CSSM Version 1.0 11.02.2019 Page 80 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
±0.3 Nm Screw in the four screws (7) [2.7 Nm C-SC_CSSM Version 1.0 11.02.2019 Page 81 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Position the container (1). Position the hose (2). Photo shows similar product C-SC_CSSM Version 1.0 11.02.2019 Page 82 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Screw in the screw (6) [0.9 Nm Photo shows similar product C-SC_CSSM Version 1.0 11.02.2019 Page 83 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Repeat steps 1 to 5 on the opposite side of the machine. C-SC_CSSM Version 1.0 11.02.2019 Page 84 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Turn the tightened set screws 60° anticlockwise. 60° Photo shows similar product C-SC_CSSM Version 1.0 11.02.2019 Page 85 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Page 86
Turn the tightened set screws 60° anticlockwise. 60° Photo shows similar product C-SC_CSSM Version 1.0 11.02.2019 Page 86 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Page 87
Repeat the process after undoing or tightening the set product screws. C-SC_CSSM Version 1.0 11.02.2019 Page 87 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.
Inspection following repairs Inspection following repairs Not currently available. C-SC_CSSM Version 1.0 11.02.2019 Page 88 of 88 All rights reserved by FEIN, especially in case of property rights applications. FEIN retains all rights of disposal, such as copying and circulation.