Summary of Contents for Transcend Secure Digital Card TS1GSDG
Page 1
DAT0 I/O/PP Data Line [Bit0] DAT1 I/O/PP Data Line [Bit1] I/O/PP Data Line [Bit2] DAT2 Transcend Information Inc. Features • ROHS compliant product • Operating Voltage: 2.7 ~ 3.6V • Operating Temperature: -25 ~ 85°C • Insertion/removal durability: 10,000 cycles •...
Page 2
Secure Digital Card Architecture Transcend Information Inc.
Page 3
Pull-up resistance inside card (pin1) Note that the total capacitance of CMD and DAT lines will be consist of C connected separately to the SD Memory Card host. Parameter Pull-up resistance Bus signal line capacitance Transcend Information Inc. Symbol Min. -0.3 Symbol Min.
To meet the requirements of the JEDEC specification JESD8-1A, the card input and output voltages shall be within the following specified ranges for any V Parameter Symbol Output HIGH voltage Output LOW voltage Input HIGH voltage Input LOW voltage Transcend Information Inc. of the allowed voltage range: Min. Max. 0.75* V 0.125* V 0.625* V + 0.3 –...
Page 5
Clock frequency Data Transfer Mode Clock frequency Identification Mode (The low freq. is required for MultiMediaCard compatibility.) Clock low time Clock high time Clock rise time Transcend Information Inc. Symbol Max. ) and max (V Secure Digital Card Unit Remark ≤...
Page 6
Inputs CMD, DAT (referenced to CLK) Input set-up time Input hold time Outputs CMD, DAT (referenced to CLK) Output Delay time Transcend Information Inc. ODLY Secure Digital Card ≤ 100 pF, (7 cards) ≤ 250 pF, (21 cards) ≤ 25 pF, (1 cards) ≤...
Transcend reserves the right to make changes in specifications at any time without prior notice. Transcend Information Inc. Operation: -25°C / 85°C Storage: -40°C (168h) / 85°C (500h)