Adjusting Basic Machine; Needle Height (Pre-Calibrating) - Pfaff 3538-20/02 Adjustment Manual

13

Adjusting basic machine

.05
13 Needle height
.05.01
Rule
When the needle bar is in t.d.c., the clearance between the needle point and needle
plate should be approx. 12 mm with a needle bar stroke of 36 mm.
Fig. 13 - 01
Adjust the needle bar 1 (screw 2) without twisting according to the rule.
(pre-calibrating)
Adjustment
12 mm
2
1
5