Page 1
Manual Slim SATA is a non-volatile, solid-state storage device. With its Serial ATA interface and Slim SATA (MO-297) form factor, it is a drop in replacement for hard disk drives. Slim SATA delivers extremely high levels of performance, reliability and ruggedness for I/O intensive or environmentally challenging applications.
Page 2
Revision History Date Revision Description Checked By 2/7/17 Initial release 2/14/17 Update PN table modified from SFEM1XXXGSXXX_H for Viking format with new PN’s 3/14/17 performance, block diagram, TBW, power consumption. Manual 3/14/2017 PSFEM1xxxxZxxx Viking Technology Revision C Page 2 of 33...
Page 3
Sanmina may make improvements or changes in the product(s) and/or the program(s) described in this documentation at any time. Sanmina, Viking Technology, Viking Modular Solutions, and Element logo are trademarks of Sanmina Corporation. Other company, product or service names mentioned herein may be trademarks or service marks of their respective owners.
Page 4
SATA 6GB (0 to +70'c) TSB 15nm L-die, MLC Notes: Higher capacity points may be available based on customer application. Consult your local Viking Field Application Engineer. SSD’s ship unformatted from the factory unless otherwise requested. Manual 3/14/2017...
Page 5
Product Picture(s) Slim SATA Manual 3/14/2017 PSFEM1xxxxZxxx Viking Technology Revision C Page 5 of 33 www.vikingtechnology.com...
Page 6
Client/Industrial SSD’s – Viking’s Client/Industrial SSD contains sophisticated provisions to protect firmware and data from corruption due to unexpected power loss. However, an Industrial SSD by industry definition does not contain on-board capacitance. Should power fail unexpectedly, “in-flight” write data may be lost.
Power Consumption Environmental Conditions 2.5.1 Temperature 2.5.2 Shock and Vibration 2.5.3 Electromagnetic Immunity Reliability MECHANICAL INFORMATION Slim SATA SSD Weight PIN AND SIGNAL DESCRIPTIONS Pin Locations Signal and Power Description Tables Hot Plug Support COMMAND SETS Manual 3/14/2017 PSFEM1xxxxZxxx Viking Technology...
Page 8
Power Management Command Set 5.1.7 Security Mode Feature Set 5.1.8 Identify Device Data 5.1.1 S.M.A.R.T. Support 5.1.2 SATA 3.0 S.M.A.R.T. Command Set SATA Commands 5.2.1 Native Command Queuing (NCQ) REFERENCES GLOSSARY Manual 3/14/2017 PSFEM1xxxxZxxx Viking Technology Revision C Page 8 of 33 www.vikingtechnology.com...
Page 9
Table 5-6: Supported S.M.A.R.T. EXECUTE OFF-LINE IMMEDIATE Subcommands ________ 31 Table of Figures Figure 1-1: High-Level Block Diagram _____________________________________________ 11 Figure 3-1: Dimensions ________________________________________________________ 18 Figure 4-1: Layout of Signal and Power Segment Pins ________________________________ 19 Manual 3/14/2017 PSFEM1xxxxZxxx Viking Technology Revision C Page 9 of 33 www.vikingtechnology.com...
1 Introduction Viking’s rugged industrial designed SSD’s offer the highest flash storage reliability and performance in harsh environments such as shock, vibration, humidity, altitude, ESD, and extreme temperatures. 1.1 Features The SSD delivers the following features: Offers seamless SATA Revision 3.0 interface support for SATA up to 6Gb/s ...
1.2 Block Diagram Figure 1-1: High-Level Block Diagram Notes: Support for up to 2-channels and 2 CE in the NAND Flash interface Manual 3/14/2017 PSFEM1xxxxZxxx Viking Technology Revision C Page 11 of 33 www.vikingtechnology.com...
If the host computer is unable to negotiate a speed of 6 Gbps, the SATA interface automatically renegotiates to a speed of 3 Gbps or 1.5 Gbps. For a list of supported commands and other specifics, please see Chapter 5. Manual 3/14/2017 PSFEM1xxxxZxxx Viking Technology Revision C Page 12 of 33 www.vikingtechnology.com...
256GBx2, BGA, TSB 15nm Notes: 1.Performance measured using CrystalDiskMark. 2.Performance may vary from flash configuration, SDR configuration, and platform. 3.Refer to Application Note AN0006 for Viking SSD Benchmarking Methodology. 4.Data is based on SSD’s using Toshiba A15nm Toggle NAND devices Manual 3/14/2017...
(all LBA’s have valid content). 4. Performance may vary by NAND type and host. 5. Refer to Application Note AN0006 for Viking SSD Benchmarking Methodology. 6. Data is based on SSD’s using Toshiba A19nm NAND devices 2.3 Timing...
Maximum Voltage Range for Vin -0.2 Maximum Commercial Temperature Range Maximum Industrial Temperature Range 2.4.2 Supply Voltage The operating voltage is 5.0v Table 2-6: Operating Voltage Description Unit Operating Voltage - 5% Manual 3/14/2017 PSFEM1xxxxZxxx Viking Technology Revision C Page 15 of 33 www.vikingtechnology.com...
1. SLC flash based products may be available in the following temperature ranges: 2.5.2 Shock and Vibration SSD products are tested in accordance with environmental specification for shock and vibration Manual 3/14/2017 PSFEM1xxxxZxxx Viking Technology Revision C Page 16 of 33 www.vikingtechnology.com...
Frequency/Acceleration: 80Hz~2000Hz/20G X, Y, Z axis/60 min for each 2.5.3 Electromagnetic Immunity Slim SATA is an embedded product for host systems and is designed not to impair with system functionality or hinder system EMI/FCC compliance. 2.6 Reliability Table 2-10: Reliability Specifications...
3.1 Slim SATA SSD Weight The weight of a Slim SATA (MO-297) SSD is approximately 8.0 grams. 4 Pin and Signal Descriptions 4.1 Pin Locations Figure 4-1: Layout of Signal and Power Segment Pins Signal Segment S1 Power Segment P1 4.2 Signal and Power Description Tables...
Total number of user addressable sectors 0000h Obsolete 0407h Multi-word DMA modes supported/selected 0003h PIO modes supported Minimum Multiword DMA transfer cycle time 0078h per word Manufacturer’s recommended Multiword DMA 0078h Manual 3/14/2017 PSFEM1xxxxZxxx Viking Technology Revision C Page 24 of 33 www.vikingtechnology.com...
Page 25
100-103 See *4 Streaming Transfer Time – PIO 0000h Maximum number of 512-byte blocks per 0000h DATA SET MANAGEMENT command 4000h Physical sector size / Logical sector size Manual 3/14/2017 PSFEM1xxxxZxxx Viking Technology Revision C Page 25 of 33 www.vikingtechnology.com...
Page 26
Write read verify feature set current mode Reserved 107Fh Transport major version number Transport minor version number 224-229 reserved 230-233 Extend number of user addressable sectors 0001h Minimum number of 512-byte data blocks per Manual 3/14/2017 PSFEM1xxxxZxxx Viking Technology Revision C Page 26 of 33 www.vikingtechnology.com...
The ATA specification is flexible and provides for individual manufacturers to define their own unique vendor specific information. This section describes the baseline supported Manual 3/14/2017 PSFEM1xxxxZxxx Viking Technology Revision C Page 27 of 33 www.vikingtechnology.com...
(6 bytes) Total Erase Count Read retry count Do wearleveling count CRC error write count Notes: Dummy is null and not used Table 5-5: Extended SMART Attribute Actual Data Manual 3/14/2017 PSFEM1xxxxZxxx Viking Technology Revision C Page 29 of 33 www.vikingtechnology.com...
Page 30
64GB each count Flash write Host write 64GB count 64GB count ) Host read Total internal copy ecc error count Total Average erase count Max erase count Total Erase Count Manual 3/14/2017 PSFEM1xxxxZxxx Viking Technology Revision C Page 30 of 33 www.vikingtechnology.com...
READ FPDMA QUEUED WRITE FPDMA QUEUED Note: With a maximum queue depth less than or equal to 32. 6 References Serial ATA Specification, Revision 3 Manual 3/14/2017 PSFEM1xxxxZxxx Viking Technology Revision C Page 32 of 33 www.vikingtechnology.com...
Self-Monitoring, Analysis and Reporting Technology: an open standard for developing hard drives and software systems that automatically monitors a hard drive’s health and S.M.A.R.T. reports potential problems. Solid-State Drive Manual 3/14/2017 PSFEM1xxxxZxxx Viking Technology Revision C Page 33 of 33 www.vikingtechnology.com...