Remote Management; Statistics - TP-Link TL-WR941N User Manual

Click the Refresh button to refresh the logs.
Click the Clear All button to clear all the logs.

4.12.8 Remote Management

Choose menu "System Tools → Remote Management", you can configure the Remote
Management function on this screen (shown in Figure 4-49). This feature allows you to manage
your Router from a remote location via the Internet.
Web Management Port -
default remote management web port number is
change the remote management web interface to a custom port by entering that number in
the box provided. Choose a number between 1024 and 65534, but do not use the number of
any common service port.
Remote Management IP Address - This is the current address you will use when
accessing your router from the Internet. The default IP address is 0.0.0.0. It means this
function is disabled. To enable this function, change the default IP address to another IP
address as desired.
Note:
1) To access the router, you will type your router's WAN IP address into your browser's
address (in IE) or Location (in Navigator) box, followed by a colon and the custom port
number. For example, if your Router's WAN address is 202.96.12.8, and the port number
you use is 8080, please enter
asked for the router's password. After successfully entering the username and password,
you will be able to access the router's web-based utility.
2) Be sure to change the router's default password to a very secure password.

4.12.9 Statistics

Choose menu "System Tools→Statistics", you can view the statistics of the Router, including
total traffic and current traffic of the last "Packets Statistic interval" seconds.
TL-WR941N/TL-WR941ND
Figure 4-49 Remote Management
The port number used to access the router.
http://202.96.12.8:8080
- 58 -
Wireless N Router
80. For greater security, you'd better
in your browser. Later, you may be
This router's