COM Port Power Jumper: JCOMP1, JCOMP2, JCOMP3
These jumpers specify the operation voltage of the onboard serial ports.
BIOS Select Jumper: JBIOS1
This jumper is used to enable/disable the BIOS flash. When you intend to update
the BIOS code, short connect pin#2-3 first. Under normal operation, we suggest
that you enable the BIOS flash protection by short connecting pin#1-2 to protect
the system BIOS from virus infection.
LVDS Power Jumper: JVDD1
Use this jumper to specify the operation voltage of the LVDS interface flat panel.
Inverter Power Jumper: JINV1
Use this jumper to specify the operation voltage of the inverter module.
1
5V (Default)
1
5V (Default)
1
1
Enable
Carrier Board
Module Board
BIOS
BIOS (Default)
1
3V (Default)
1
5V (Default)
1
+12V
1
+12V
Enable
1
5V
1
+12V
MS-99A1
2-15