Advanced - TP-Link TL-WN827N User Manual

choices will appear as Figure 3-5.
Rescan: Click the Rescan button to refresh the list at any time.
Add to Profile: Highlight an SSID and click the Add to Profile button to add the network to
the profile. The continued steps are similar to add a new profile, please refer to the 3.1.1
Profile: To Add a new profile.
Connect: Highlight an SSID and click the Connect button to connect to an available network
without adding it to the profile..

3.1.3 Advanced

Click the Advanced tab of the Utility and then you can choose the wireless mode on the following
screen.
Wireless mode – You can choose the wireless mode from the pull-down list with the three
options: 802.11B/G/N mix, 802.11B/G mix or 802.11B only.
Enable TX Burst - It can translate more data when it enable.
Fast Roaming at – Roaming will disable when Transmit Power is below some dBm if the
TL-WN827N Wireless N USB Adapter User Guide
Figure 3-5 Network tab
Figure 3-6 Advanced
- 13 -