Remove The Touch Pad With Cable; Remove The Upper Case (With Keyboard) - Lenovo IdeaPad Slim 7 Series Hardware Maintenance Manual

Remove the touch pad with cable

Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 28
"Remove the battery" on page 29
"Remove the solid-state drive (with Al foil)" on page 30
"Remove the WLAN" on page 31
"Remove the thermal module (with fans)" on page 35
"Remove the USB board with cable" on page 38
"Remove the power button (with fingerprint board and cable)" on page 40
"Remove the system board" on page 41
Step 1. Remove the touchpad mylar and retain it for use when installing the new touchpad.
Step 2. Remove the six screws and then remove the touchpad with cable.
Figure 26. Remove the touchpad
Screw specifications
M2 x L1.5
Go to https://support.lenovo.com/partslookup
replacement parts:
Touchpad
Touch cable

Remove the upper case (with keyboard)

Make sure the following FRUs (CRUs) have been removed.
"Remove the lower case" on page 28
"Remove the battery" on page 29
"Remove the solid-state drive (with Al foil)" on page 30
"Remove the WLAN" on page 31
Number of screws
6
to look up the Lenovo part numbers of the following
.
Chapter 4 Removing a FRU or CRU
43