Step 1 Preparing The Chassis - Fujitsu SMARTCASE S520 Assembly Instructions Manual

Assembly Instructions SMARTCASE S520

Step 1 Preparing the Chassis

Open the chassis with two hands by putting some pressure on your thumbs to push the cover reverse.
Remove top cover and unpack the accessories.
(Chassis kit content)
Please install the additional EMI gasket
in the position as marked in the
Note: This EMI gasket has been
implemented as running change, may
not be included in first shipments!
__________________________________________________________________________________________________________________________________________________________
Page 3 of 12
Remove the tape (transportation lock) of the thermal pad carefully!
Note: Thermal pad has been implemented as running change, may
not be included in first shipments!
chassis.
V1.1 - 07/2019
Rear Cover
www.fujitsu.com