Model WS-A65 cabinet is assembled in two pieces. These two pieces may be separated to allow easier delivery and
setup.
Cabinet Separation Precedure
1. Remove the Screen Assembly and disconnect
all cable harnesses between the Frame
Assembly and the PCB-SIGNAL, refer to
Cabinet Front Disassembly.
2. Remove the 4 screw covers "a".
3. Remove 4 screws "b" securing the top and
bottom cabinet sections .
4. Carefully lift the cabinet top and place it on
the floor.
5. Place the cabinet bottom in the desired loca-
tion.
6. Reverse the procedure and mount the cabinet
top on the cabinet bottom.
7. Reinstall the the Screen Assembly and
connect all cable harnesses between the
Screen Assembly and the PCB-SIGNAL.
MODELS: VS-A50 / WS-A48 / WS-A55 / WS-A65
CABINET SEPARATION PROCEDURE
(WS-A65)
Page 14