Mts Broadcast Compatibility - Toshiba W-608 Owner's Manual

RECORDING

MTS Broadcast Compatibility

This VCR can receive or record MTS (Multichannel TV Sound) broadcasts. By connecting the VCR to
your stereo system or stereo TV, you will experience the SAP or stereo sound.
Preparation
Connect a stereo TV or stereo system to the AUDIO OUT jacks of the VCR.
1 2 3
4 5 6
7 8 9
0 100
DISPLAY
PLAY
1
REW FF
STOP
1, 2
1
A.SELECT
Selecting a sound
Sounds recorded on the tape
According to your setting of "SAP SET" on the SET UP screen, the sound is recorded onto different
tracks of the tape as below. Set "SAP SET" to "ON" or "OFF" appropriately.
Type of receiving
broadcast
Regular
(monaural audio)
Stereo
Regular+SAP
Stereo+SAP
Sounds in playback
You can play SAP and/or stereo broadcasts with this VCR. Press A.SELECT to select a desired sound.
Desired sound
SAP sound
Stereo sound
Note
When the TV is connected to the RF OUT terminal of the VCR, the output sound is monaural.
40
Recording the SAP/Stereo Broadcast
1
On the SET UP screen (page 14),
select "SAP SET" using PLAY or
STOP , and set to "ON" using REW
or FF .
2
Press PROG . twice to exit.
3
Perform a recording.
SAP (Second Audio Program broadcast):
A separate audio program, usually broadcast in a second language with the
main language.
Setting of "SAP SET"
on the SET UP
screen
"ON" or "OFF"
"ON" or "OFF"
"ON"
"OFF"
"ON"
"OFF"
L , R indicators in the VCR display
R (right) is on.
Both R (right) and L (left) are on.
On-Screen Display
(Press DISPLAY .)
"SAP" "STEREO"
not lit not lit
not lit lit
lit not lit
lit not lit
lit lit
lit lit
Sound output
SAP
Stereo
PROGRAM
n
TAPE LE GTH
SAP SET
n
COU TER MEM
n
LA GUAGE
n
E D : PROG
Contents of recorded sound
Hi-Fi sound track
Normal sound
track (Mono)
L
MONO MONO
MONO (MIXED) STEREO
MONO MONO
MONO MONO
MONO MONO
MONO (MIXED) STEREO
PRESET
SET UP
120 160 180
on off
on off
n
E G FRA ESP
R
MONO
SAP
MONO
SAP