Section 4: Typical Wiring Diagrams - Roberts Gorden CORAYVAC Installation Manual

SECTION 4: TYPICAL WIRING DIAGRAMS

DANGER
Electrical Shock Hazard
Disconnect electric before service.
Controller must be properly grounded to an
electrical source.
Failure to follow these instructions can
result in death or electrical shock.
Note: Systems must be electrically grounded in
accordance with the following codes: United States:
Refer to National Electrical Code
revision. Wiring must conform to the most current
National Electrical Code
special diagrams furnished. Canada: Refer to Cana-
dian Electrical Code, CSA C22.1 Part 1 - latest revi-
sion.
® , NFPA 70 - latest
®
, local ordinances and any
SECTION 4: T W D
YPICAL IRING IAGRAMS
23