3. Speak in a normal
voice level toward
the telephone.
4. Press
To answer an incoming call using speakerphone
1. Press the
with the flashing
LED with the handset
on-hook.
2. Speak at a normal voice level toward the telephone.
3. Press
Speed Dial
Speed Dial enables you to call a telephone number with a two- or three-digit access
code. There are two types of Speed Dial numbers:
Station—assigned by individual station users to their own station and can only be
dialed from the station that assigns it.
System—assigned only from attendant consoles or a designated station (typically
the System Administrator station), and can be used by other stations. (See System
Administrator User Guide for storing instructions.)
Important!
Strata DK Electronic Telephone 5/00
Note
.
Your call is disconnected.
or [DN]
The CO or [DN] LED flashes (in-use) and you are
connected to the call.
to disconnect the call.
If you do not perform the following procedures within a specified time
(set in system programming for either one or three minutes) when
storing speed dial numbers, the operation times out and your telephone
returns to idle mode.
Your
button must be set in system
programming to ON at the start of a call. If
not, you must press the
talking.
Features
Speed Dial
button before
61