To Use A One Touch Button; Setting/Changing A Personal Speed Dial Code - Toshiba IP5000 User Manual

Table 13 Special Characters
Entry Meaning
Indicates "stop." The One Touch button blinks rapidly and stops the delivery of
*
+ the remaining digits in the string until it is pressed again. Multiple "stops" can be
programmed into one string.
Pause (1~9) seconds. If you need to pause longer than nine seconds, enter
*
additional pause escape sequences. For example, to insert a 17-second pause,
(1~9)
enter
without specifying the duration. In this example, you would see "PP."
** *
*
# #
Example of Special Character Usage
To create a One Touch for Park and Page under one button, program the following
sequence under the One Touch button.
CNF #33***
CNF
– puts the caller on hold and gets new dial tone.
#33
– code to park call
**
– this special character outputs a single * which will select an available orbit
and display the selected orbit on the phone.
*
– This special character is a Stop. The dial string pauses and enables the
user to view the selected orbit on the display. The dial string will restart from this
point when the One Touch button is pressed again.
FB1
– gets new dial tone on the PDN
#30
– code for All Call Page which allows the user to page the location of the
orbited call.

To Use a One Touch Button

Press the One Touch button.

Setting/Changing a Personal Speed Dial Code

See "Storing a System/Station Speed Dial Number" on page
Strata CIX IP5000-series Telephone UG
*9*8
. The display of a pause in the Speed Dial Number shows a "P"
FB1 #30
10/08
User Programming
One Touch Buttons
72.
99