Chapter 6 - Dadm/Dss Console Dadm; Buttons And Leds - Toshiba DKT3000/2000 User Manual

DADM/DSS Console
DADM
DADM
Digital add-on Modules (DADM) can be connected to both the 3000- and 2000-series
telephones to provide additional buttons.The 3000-series telephone requires a 3000-
series DADM; the 2000-series telephone requires a 2000-series DADM.
The DADM3020 model, is shown below, right. The DADM2020 (not shown) looks
similar and has the same functions.

Buttons and LEDs

The buttons can be programmed for Direct
Station Selection (DSS), outside line access,
and Station or System Speed Dial. Directory
Numbers or other functions cannot be
assigned to DADMs.
Each DSS button and
LED that provides a status of the outside line
or station assigned to it. The DSS button acts
like a speed dial button to a specific
extension.
• A station or line shows steady red when in
use by others; green when in use by the
DADM.
• A DSS LED will flash red while making a
call and turn intermittently green once
connected.
• An outside Line LED is green when the
outside line is in use by the DADM
console user. It is red if it is in use by
another telephone user.
Button numbers in the figure to the
Note
right are examples only.
76
button has an
Strata CTX DKT3000/2000-Series Telephone 05/02
209 219 229
208 218 228
207 217 227
206 216 226
205 215 225
204 214 224
203 213 223
202 212 222
201 211 221
200 210 220
First DADM Second DADM
239
238
237
236
235
234
233
232
231
230