Speed Dial; Making A Call Using Speed Dial - Toshiba CIX User Manual

Speed Dial

Speed Dial (SD) enables you to dial a sequence of up to 32 digits with a shorter code.
Dial sequences can include telephone numbers, authorization codes, passwords
feature activation codes and pauses. Speed Dial may be used to originate a call or
invoked after a call is established. There are two types of Speed Dial:
• Station SD – Your System Administrator allocates a block of up to 100 personal
SD numbers (10 per telephone). You have exclusive use of them and you can
create and change them from your own telephone.If you have a IPT3014 telephone,
you can assign names to your station SD numbers to appear on the Personal SD
Directory display (see your System Administrator or use the procedure for
"Storing Personal Speed Dial Names" on page
• System SD – All telephones in your system can share a list of up to 800 System
Speed Dial numbers under the exclusive control of the System Administrator. In
some cases, System Speed Dial enables you to reach numbers that you would not
be allowed to dial directly from your telephone.

Making a Call Using Speed Dial

There are two ways to begin a Speed Dial Call.
Spdial
1. Press
...or press the
2. Dial the Station or System Speed Dial Number. Station Speed Dial numbers
occupy numbers 100~199. System Speed Dial numbers occupy numbers 200~999.
Table 5 Speed Dial Access Codes
Feature
Speed Dial (Dialing an SD number)
1
Station
1
System
1. Stations must be assigned/enabled Speed Dial capabilities in system programming by an
Administrator in Program 200-30 (System SD) and Program 200-35 (Station SD).
2. If your telephone does not have a Spdial button, press the
Speed Dial bin number (nnn).
Strata CIX and CTX IPT/DKT Telephone
on a DKT3000-series digital telephone
*
button on any telephone.
Feature Access Code Sequences
Spdial
nnn = 100~199 Station SD bin numbers
Spdial
nnn = 200~999 System SD bin numbers
03/05
96.)
nnn
2
+
nnn
2
+
*
button, then dial the three digit
Advanced Operation
Speed Dial
67