Two Workers For Maintenance When Engine Is Running; Precautions For Conveyor Maintenance - Komatsu Galeo BR380JG-1 Operation & Maintenance Manual

PRECAUTIONS FOR MAINTENANCE PRECAUTIONS FOR MAINTENANCE
Put blocks under the track to prevent the machine from moving.

TWO WORKERS FOR MAINTENANCE WHEN ENGINE IS RUNNING

To prevent injury, do not carry out maintenance with the engine
running. If maintenance must be carried out with the engine
running, carry out the operation with at least two workers and do
as follows.
One of the two should take his/her stand before the control
panel, all ready to stop the engine any moment.
When working near any revolving parts of the machine,
exercise the special care, since there is always the danger of
getting caught in the revolving parts.
If it becomes necessary to clean the interior of the radiator with
the engine running, turn the mode selector switch (A) to the
"Work" position. Moreover make sure that the work will be
carried out by two workers in combination.
Do not touch the control levers. If it becomes unavoidable to do
so, signal the partner to evacuate to a safe place.
If part of your body or tools touch the fan blades or the fan belt,
they may be cut off, so never touch any of them.

PRECAUTIONS FOR CONVEYOR MAINTENANCE

Since you may get caught in the moving belt conveyor or the rollers, observe the following strictly.
When maintaining the belt conveyor and the rollers, be sure to stop the belt conveyor and the engine, and then
start the work.
When adjusting snaking, stop the conveyor, then stop the engine.
2 - 36
https://tractormanualz.com
SAFETY SAFETY