Superior SVEVA Instructions For The Installer page 12

4.0 INSTALLATION
Fit the front panel [3] on the stove by inserting the two
threaded pins [P] through the relative holes in the side
profiles and securing with the nuts [B] and washers [A]
provided in the kit. (Fig. 1)
Offer up the side panel [2] to the stove and insert the
bracket [C] at the front of the panel into the guide [D] in
the front profile. (Fig. 2-3)
Take care during the fitting not to scratch
the enamel and not to knock or damage the
electrical wiring or the electronic board of the
stove.
Check that the side panel is level and fits
properly; if necessary shim with the fibreglass
provided in the kit to ensure that it is level and
there is contact between the parts.
12
Fig. 1
3
Fig. 2
Fig. 3
D
H07024030 / DT2000551-01
DT2011881-01
P
3
DT2032771-0
D
DT2032772-0
C
2
VISTA DALL'ALTO
TOP VIEW
DT2032767-0
A
B
2