Notes on making the settings ... 51 Setting recommendations on the Internet ... 51 Assistance in setting your equaliser ... 52 DSC programming ... 53 Overview of the DSC factory settings .. 55 Specifications ... 56 Blaupunkt telephone hotline ... 56...
Quick reference 1 Switching on/off with the buttons: Press one of the buttons illustrated here after you have inserted the Key- Card. The unit will play at the pre-adjusted volume. Switching on/off with the KeyCard: The set is switched on or off by insert- ing or removing the KeyCard.
Page 5
“SCAN” will alternate with the abbrevi- ated name of the scanned station in the display. The unit will scan all of the stations stored on the preset buttons in the cur- rent reception range. To stop Scan / Preset Scan: Press SC or the search rocker switch once again.
Page 6
7 Display l m n a) NDR2 - Station name b) VIVALDI - CD name or c) 1 : 52 - CD time (playback time) and number (CD number) d) 16:31 - Time e) FM - Waveband f) 6 - Preset button (1-6) g) I, II, T - Memory bank I, II or Travelstore...
Page 7
Regional function on/off: Press the AF button for approximately 2 seconds until you hear a beep. “REG ON” or “REG OFF” will appear in the display (see the section on REG - re- gional programme). ; TA (Traffic Announcement) When “T” lights up in the display, the radio is currently playing a traffic infor- mation station.
Page 8
@ DSC (Direct Software Control) Use the DSC function to customise certain programmable, basic settings to suit your personal needs and prefer- ences. See the section on “DSC pro- gramming” for more information. A AUD Adjusts the treble and bass frequen- cies.
To end the announcement before it has finished press the TA button. Accessories Use Blaupunkt-approved accessories and spare parts only. You can use the following Blaupunkt prod- ucts with this car stereo: Amplifier All Blaupunkt amplifiers Remote control...
KeyCard theft protection system This car radio includes one KeyCard as standard equipment, but it can also be op- erated with a second card. If you have lost your KeyCard or if it was damaged, you can buy a new one from your specialised dealer.
Displaying the radio pass data Using the KeyCard supplied with your set you can have the radio pass data such as the model name, product number (7 6..) and serial number indicated on the display pan- Please refer to the section on “DSC pro- gramming - READ KC”.
Selecting the operating mode Using the SRC (source) button you can switch between the radio and CD audio sources. The CD mode is not available unless a disc is inserted. To switch between the modes, • press SRC briefly. Radio operation with RDS (Radio Data System) The Radio Data System will enhance your enjoyment when you listen to FM radio sta- tions.
would like to take advantage of full RDS service, switch to “REG OFF”. • Press the AF button for approximately 2 seconds until “REG OFF” appears. “REG ON” or “REG OFF” will appear briefly in the display each time the radio is switched Selecting a waveband With this car radio you can select between the following wavebands:...
If “AF” is not lit up, • press AF. This fulfils the requirements for selecting stations with << >>. Switching between the memory banks (FM) You can switch between the memory banks I, II and T in order to store stations and re- call them later.
All of the stored stations on the selected waveband will be scanned one after the oth- er. In the display “SCAN” will alternate with the flashing station name or frequency. To select a scanned station and switch off Preset Scan: •...
Switching PTY on/off • Press PTY. When the function is active, the programme type selected last will briefly appear in the display. “PTY” will appear permanently in the lower right corner of the display panel. Programme type Use << >> to have the last selected pro- gramme type displayed and to choose a new one.
b) Using the << >> buttons on the rocker switch When PTY is switched on, you can se- lect a programme type using buttons << >>. • Press << or >>; the programme type selected last will be displayed for 3 seconds. •...
The radio will switch to the linked sta- tion NDR2 for the duration of the “POP” programme. During CD operation, the set will also switch to the programme offering the selected PTY within the broadcasting network. After the PTY programme has ended the system will switch back to the previous mode (radio or CD).
Switching the warning beep off a) Tune into another station offering traf- fic information: • Press the rocker switch or • press a preset button which has a traffic programme station allocated to it. Alternatively: b) Switch off the priority for traffic an- nouncements: •...
CD operation This car stereo is equipped with a CD drive. Note: Use only standard circular CDs measuring 12 cm in diameter! CDs measuring 8 cm in diameter or CDs in different shapes such as a butterfly or beer mug are not suitable for playback using this equipment.
The MIX function is off when “MIX OFF” appears in the display. SCAN Use this function to scan all of the CD tracks. To start the Scan function: • Press SC briefly, the display will indi- cate “CD-SCAN”. The titles will be scanned one after the oth- er in ascending order.
• Press DSC. • Press / as many times as required until “CD UPD” appears on the display panel. • Press >> to select “CLR DISC” if you want to delete the name of that CD, Press << to select “CLR ALL” to delete the names stored for all of the CDs.
Displaying the clock You can set the clock to permanent display in both the radio and CD modes. If another function is selected, the clock dis- play will disappear for approximately 8 sec- onds and the station selected, for example, will appear in the display.
Now you can compare the sound produced by your car stereo with and without the equaliser. Setting recommendations on the Internet Refer to our home page on the Internet http://www.blaupunkt.de to find setting recommendations for new vehicles on the market.
Assistance in setting your equaliser Start to make your settings in the mid-range/treble and end it with the bass range. Frequency range Sound impression / Problem Bass 30 – 100 Hz Bass reproduction too weak Lower mid-range 100 – 400 Hz Unclear bass Playback reverberates Unpleasant pressure...
DSC programming The car stereo has been equipped with DSC (Direct Software Control) to allow you to customise certain programmable, basic set- tings to suit your personal needs and pref- erences and then store them. The basic settings for this audio equipment were made at the factory.
Page 27
LEARN KC To “train” a second Key- Card. Please read the information in the section on “KeyCard theft protection system - “Training” a second Key- Card”. SHARX Switches the bandwidth in the FM frequency range. When there is a large number of stations within your current reception range, use <<...
AM ON/OFF It is possible to block out one or both of the AM wave- bands (MW/LW). This means you will select only the wavebands you want when you press BND: AM ON – all wavebands are available MW OFF – LW, FM only LW OFF –...
Address of the next service centre in your vicinity (only for Germany) If you would like to know the address of the next Blaupunkt service centre of your area without having our service list at hand: Find out your area code.