Operating Machine - Singer Merritt 2404 Instruction Book

Qperating Machine
Connecting Machine
Before plugging in your machine, be sure that the volt-
age and number ot cycles indicated on the electrical
nameplate
A,
conform to your electrical power supply.
Your speed controller cord has
a
motor disconnect
plug, pus h the plug D, into the receptacle at right end
of motor. Then connect the power-line plug C to your
electrical outlet.
CAUTION:
Disconnect tne power line plug from tne
socket outlet when changing needles,
teet.
or needle
plates or when leaving tne machine unattended. This
eliminates the possibility
ot
starting tne machine by
accidental/y pressing tne speed control/er.
Operating Machine
To turn on the machine and sewing light. press the
power and light switch located on the motor.
To run lhe machlne and. conlrol speed,
press the
speed controller O with your toot. The harder vou
press, the faster the machine will sew. To stop ma-
chine, remove foot from controller.
CAUTION:
Because of the up and down movement
of the needle, you must woik careful/y and watch tne
sewing area when operating tne machine.
18