Connections And Installation; Connections - Toshiba TLP-MT3E Owner's Manual

14

Connections and installation

Connections

Connecting video equipment
Check that the power for the projector and computer is off before
connecting the cables.
(not supplied)
Audio cable (not supplied)
To audio output R
(red)
To audio output L
(white)
To RGB To RGB
INPUT INPUT
(AUDIO)
(RGB)
RS-232C RGB AUDIO RGB AUDIO
CONTROL MONITOR OUTPUT RGB INPUT
To VIDEO INPUT (VIDEO) (yellow)
VIDEO INPUT
S-VIDEO VIDEO L - AUDIO -R
To VIDEO INPUT (AUDIO L) (white)
To VIDEO
To VIDEO INPUT (AUDIO R) (red)
INPUT
(S-VIDEO)
Audio/Video cable
(supplied)
S-VIDEO cable
To Video output
(not supplied)
(yellow)
To Audio output
(white)
To Audio output
(red)
To S-VIDEO output
Video tape player
Note
Several video equipments can be connected to the S-VIDEO jack and
VIDEO jack separately.
To P R (C R ) output
To P B (C B ) output
To Y output
Video player with component video outputs
Connecting to SCART socket
To SCART
white red
socket
Adapter for
SCART socket
(supplied)
yellow
Output terminals
Check that the power for the projector and computer is off before
connecting the cables.
RS-232C
CONTROL
You can connect a computer
to control the projector. 40
Audio cable
(not supplied)
Connect a stereo system
for dynamic sound.
Notes
• Sound of the source which you select is output to the connected
stereo system, etc.
• The MONITOR OUTPUT (RGB output) connector always sends out a
signal which is input to the RGB INPUT (RGB input) connector
regardless of your source selection.
• Even while the projector is in standby mode, the MONITOR OUTPUT
(RGB output) connector continues its output.
RGB AUDIO RGB AUDIO
MONITOR OUTPUT RGB INPUT
VIDEO INPUT
S-VIDEO VIDEO L - AUDIO -R
You can connect an
extra monitor to view
the picture.
To MONITOR OUTPUT (AUDIO)
ø3.5mm STEREO mini plug
(Audio output level is constant.)
To audio input
(Continued)