Toshiba TDP-P75 Owner's Manual page 20

English
Preparing and using the remote control
(Continued)
Switching operation modes
Operation modes should be switched between projector operation and computer
operation.
PJ MODE
R-CLICK
ESC
INPUT AUTO
Notes
• With the exception of operating a PC with the remote control, all buttons are
used in [PJ Mode].
• Make sure there is nothing between the remote control and the IR sensor on the
projector that might obstruct the infrared beam.
20 Overview
Switching the remote control operation mode.
Pressing this button toggles the mode.
When this button is lit, the remote control is in [PJ Mode]
(Projector operation mode).
If no operations are made for 30 seconds, this light goes out,
and the remote switches back to [PC Mode] (Computer
operation mode).
[PJ Mode] :
If no menu is displayed, adjusts volume.
[PC Mode] :
Pressing displays a laser pointer, regardless of the mode.
[PC Mode] :
on Microsoft® PowerPoint® slides, etc.
[PC Mode] :
Microsoft® PowerPoint® slides, etc.
MENU
[PC Mode] :
FREEZE
[PC Mode] : Functions as a ESC button.
Pressing one of these buttons automatically sets the remote
control to [PJ Mode].
If no operations are made for 30 seconds, and the remote
switches back to [PC Mode].
The L-CLICK (left click) button on the back of the remote
control functions when in [PC Mode].
Functions as a select button.
Functions as a mouse pointer control.
Functions as a down button. Used to go forward
Functions as an up button. Used to go back on
Functions as the right mouse button (R-CLICK).