Connecting A Video Player - Toshiba TDP-B1 Owner's Manual

Connecting a Video Player

1 If your video player uses a round, one-prong composite video
connector, you'll need only the audio cable, audio adapter,
and composite video cable that shipped with the projector.
If your video player uses a round, four-prong S-video con-
•
nector, you'll need an S-video cable in addition to the audio
cable and audio adapter. The S-video cable is sold sepa-
rately. (See "Optional Accessories" on page 37.)
2 Plug the composite video cable's yellow connector into the
"video-out" connector on your video player (Figure 6). This
connector may be labeled "To Monitor."
If you're using an S-video cable, connect it to the "S-video
•
out" connector on the video player (Figure 7).
3 Plug the other yellow connector into the composite video con-
nector on the projector.
If you're using S-video, plug the other end of the cable into
•
the "S-video" connector
audio
adapter
composite video cable
audio cable
Connecting the projector to a video player using the standard video cable (with com-
on the projector (Figure 7).
posite video connector) and the audio cable and adapter
F 6
IGURE
9