Control Switches - Bajaj CT 100 Series Owner's Manual

Control Switch LH & RH
B
A
Control Switch LH
Control Switch LH
A. Hi/Low beam switch
While engine running, Headlamp High
beam filament gets ON
While engine running, Headlamp Low
beam filament gets ON
B. Pass Switch : (
flash the head light. It is used to give
signal to vehicles coming from opposite
side while overtaking.
C
D
Control Switch LH
)Press the switch to
Control Switch RH-CT 100 ES
C. Turn Signal Switch : When the turn
signal switch is turned to Left (
Right ( ), the corresponding turn signals
flash on and off. To stop flashing, turn the
knob to center position.
D. Horn Button : (
sounding horn.
Control Switch RH
E. Starter Button (for Electric Start) : It
operates the electric starter when clutch
lever is depressed with transmission in
any gear. It is recommended to start
engine with transmission in neutral.
8
E
) or
) Press horn button for