Page 2
Copyright Notice All Rights Reserved. Any technical documentation that is made available by N.V. Nederlandsche Apparatenfabriek “Nedap” is the copyrighted work of N.V. Nederlandsche Apparatenfabriek “Nedap” and is owned by N.V. Nederlandsche Apparatenfabriek “Nedap”. Page 2 of 9...
Page 3
No warranty The technical documentation is being delivered to you and Nedap makes no warranty as to its accuracy or use. Any use of the technical documentation or the information contained therein is at the risk of the user. Documentation may include technical or other inaccuracies or typographical errors Nedap the right to make changes without prior notice.
EAS Systems. With this XQ system your able to reduce the shoplifting costs the best in combination with Nedap’s tag line. The XQMK2 system produces an acoustic - and visual signal when it detects an operating tag by means of the antennas and will identify a visitor with the active tag on one of his carried items.
Install the XQMK2 system according the: XQMK2 installation guide lines; Power up the XQMK2 system; Check the functionality; Call Nedap Customer Support for quick hands-on problem solution in case of unforeseen problems [see Technical Support]; Distance between two FL30 antennas when using hard tags Ø50 mm: 2.2 m;...
Wiring diagram Schematically diagrams below shows an example of the connections between used modules. The picture shows the full configuration that can be built up. Figure 2 Example full configuration The connections for a full configuration are: Datacom cable for NCC to Unit XQMK2 Connects Data communication and power from NCC [9203508] to a Unit XQMK2 Tx [8018464] or Unit XQMK2 Rx [8018472].
Anatel Declarations Compliance statements (part15.19) This device complies with part 15 of the FCC Rules and to RSS210 of Industry Canada. Operating is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning (part15.21) Changes or modifications not expressly approved by party responsible for compliance could void the user’s authority to operate the equipment.