Table of Contents
Advertisement
Quick Links
Manual-HotAir06-sdo-one-E
QUARTZ REFLOW OVEN
HOT AIR 06 SDO ONE
Translation of the Original Instruction
Content
Leaflet.........................................................2
Technical Data............................................2
EG-Declaration of Conformity.....................3
Intended Use of Machine............................4
Safety Instructions......................................4
Setup..........................................................5
Composition................................................6
Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck - Germany
Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: support@bungard.de
Operating....................................................7
Cleaning and Maintenance.........................8
Spare Parts and Options............................9
Guarantee.................................................10
Disclaimer of Warranty.............................10
Copyright..................................................10
page 1 / 10
Advertisement
Table of Contents
Summary of Contents for Bungard HOT AIR 06 SDO ONE
-
Page 1: Table Of Contents
Intended Use of Machine......4 Guarantee..........10 Safety Instructions........4 Disclaimer of Warranty......10 Setup............5 Copyright..........10 Composition..........6 Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: support@bungard.de... -
Page 2: Leaflet
N2 inert gas connection with flow meter All specifications are subject to change without notice. Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: support@bungard.de... -
Page 3: Eg-Declaration Of Conformity
Maschinenrichtlinie / Machinery Directive 2006/42/EG/37/EG Windeck, 10.1.2019 Jürgen Bungard Geschäftsführer Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: support@bungard.de... -
Page 4: Intended Use Of Machine
– a PCB when oven is at working temperature, use protective gloves or a heat resistant Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: support@bungard.de... -
Page 5: Setup
The building supply line must be protected by a 16 amp fuse. The machine itself has an automatic 15 A fuse. Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: support@bungard.de... -
Page 6: Composition
When the drawer is opened during the soldering process. Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: support@bungard.de... -
Page 7: Operating
At a certain point the oven demands that you Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: support@bungard.de... -
Page 8: Cleaning And Maintenance
Now open the door and replace the lamps. (See the sketch below.) Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: support@bungard.de... -
Page 9: Spare Parts And Options
The inert gas is heated before it flows into the process chamber and will not disturb the temperature profile. Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: support@bungard.de... -
Page 10: Guarantee
Copyright © 2019 Bungard Elektronik GmbH & Co. KG Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: support@bungard.de...