Adjusting The Color Convergence - Toshiba 43HX71 Owner's Manual

Adjusting the color convergence

This projection TV uses three separate TV tubes: red, green, and blue.
The red, green, and blue images are projected onto the screen where
they converge to form a full-color picture. You can see a clear picture
only when the three images converge correctly. Convergence may drift
over time or if you move the TV. If you can see clear images on your
TV screen, skip this procedure.
Make this adjustment after the TV has been on for at least 30
minutes.
To use the TOUCH FOCUS (auto convergence) button:
Press TOUCH FOCUS on the TV once. The TV will enter the
auto convergence mode and correctly adjust convergence
automatically.
TOUCH FOCUS
TOUCH FOCUS F I N I SHED
When the adjustment is complete, the normal picture will
reappear.
If the message "Touch Focus Error" appears, retry the TOUCH
FOCUS adjustment or adjust the convergence manually, as
described below.
To check and adjust the color convergence manually:
1. Press MENU, and then press x or • until the PICTURE menu
appears.
2. Press y or z to highlight CONVERGENCE.
P CTURE ANTENNA I
MODE SPORTS
FLESH TONE ON
DNR OFF
C I NEMA MODE F I LM / V I DEO
COLOR
COOL
TEMPERATURE
CONVERGENCE
SAVE NEW PREFERENCE
26
H orizontal
B R G
Vert ical
43HX71 TV front panel
CH
MENU VOL VOL EXIT TV/VIDEO TOUCH FOCUS
CH
MENU yzx •
TOUCH FOCUS
53HX71
CH
MENU EXIT TV/VIDEO TOUCH FOCUS
VOL VOL
CH
MENU yzx •
TOUCH FOCUS
MENU
yzx •
PO
POWER