Keys And Functions - Toshiba Adjustable Speed Drive H3 Operation Manual

Operating Panel Keys and Functions
The following chart explains each of the key functions on the keypad
Key
Up scroll key used for incrementing numerical values. Also, when a parameter or
group name is displayed, the name of the previous parameter/group can be
displayed by pressing this key.
Down scroll key used for decrementing numerical values. Also, when a
parameter or group name is displayed, the name of the next parameter/group
can be displayed by pressing this key.
Used to start a run from the keypad (local control).
RUN
Key changes between the local control mode and the terminal block input
control mode operation. When the local control LED in the keypad is "on",
LOCAL
operation of the drive is from the keypad.
REMOTE
This key functions as the STOP key when running from keypad (local control). In
all other modes, emergency off is engaged when this key is pressed twice.
STOP
During a drive trip, the tripped state can be reset by pressing this key twice.
CLEAR
This key is used to enter the monitor mode..
MON
This key is used to select or enter a parameter name, a parameter value, a
READ
frequency command, or a group name.
WRITE
This key is used to enter the programming mode.
PRG
TOSHIBA

Keys and Functions

Function
6 - 2