Rating
Designation
B300
ITEH
Hysteresis
Power consumption
Height
3 . DescriDtion o f Ooeration
When the detected current exceeds the detection circuit
o p e r a t i n g l e v e l , t h e d e t e c t i o n d e l a y t i m e r i s a c t u a t e d . I f over-
current is continuously detected for more then the detection delay
time set value, the overcurrent response delay timer is actuated.
Then, if overcurrent is detected when the resDonse delay timer has
elapsed, the overcurrent relay is actuated.
If current drops below the undercurrent detection set
the resgonse delay timer is actuated, and after the set tile has
the undercurrent detection relay is actuated. In the case
of undercurrent detection, the detection delay timer is not actuated.
Inductive load
Break
120
AC
240
3 A
24
DC 120
240
SPECIFICATIONS
Continuous
5 A
5 A