GMC Cadillac XT4 2019 Owner's Manual page 194

Car Wash Mode (Engine On
in Vehicle)
To place the vehicle in N (Neutral)
with the engine on and the vehicle
occupied:
1. Drive to the entrance of the
car wash.
2. Apply the brake pedal.
3. Shift to N (Neutral).
4. Release the brake pedal. The
vehicle is now ready for the
car wash.
Car Wash Mode (Engine On
out of Vehicle)
To place the vehicle in N (Neutral)
with the engine on and the vehicle
unoccupied:
1. Drive to the entrance of the
car wash.
2. Apply the brake pedal.
3. Open the door.
4. Shift to N (Neutral), then release
the brake pedal.
Driver 5. The indicator should continue to
show N. If it does not, repeat
Steps 2 4.
6. Exit the vehicle and close the
door. The vehicle is now ready
for the car wash.
7. The vehicle may automatically
shift to P (Park) when the door is
opened.
Caution
A transmission hot message may
display if the automatic
Driver
transmission fluid is too hot.
Driving under this condition can
damage the vehicle. Stop and idle
the engine to cool the automatic
transmission fluid. This message
clears when the transmission fluid
has cooled sufficiently.
D : This position is for normal driving.
If more power is needed for passing,
press the accelerator pedal down.
DRIVING AND OPERATING
To shift into D (Drive):
1. Bring the vehicle to a
complete stop.
2. From the center position, move
the shift lever back.
If the vehicle is in P (Park),
press the shift lock release
button while pulling the shift
lever back.
D will illuminate in red.
After releasing the shift lever,
it will return to the center
position.
To shift out of D (Drive):
1. Bring the vehicle to a
complete stop.
2. Shift to the desired gear.
3. After releasing the shift lever, it
will return to the center position.
Downshifting the transmission in
slippery road conditions could result
in skidding. See Skidding under Loss
of Control 0 172.
193