Method For Adjusting The Parking Brake; Method For Checking Oil Level In Pto Gear Case, Adding Oil - Komatsu PW98MR-10 Operation & Maintenance Manual

MAINTENANCE PROCEDURE
Use a 12 mm wrench
3.
Put back the plug (2) and pour oil of the prescribed type
through the hole (1), until reaching the lower edge of the
hole itself.
4.
Put back the filler cap (1).
Final reduction gears
1.
Move the machine until the plug (3) is in low position on the vertical axis.
2.
Remove the plug (3) and let the oil flow out.
Use a 12 mm wrench
3.
Move the machine until the plug (3) is positioned on the
horizontal axis.
4.
Add oil of the prescribed type until reaching the lower edge
of the hole itself.
5.
Put back the filler cap (3) and carry out some travel move-
ments; stop the machine and check the levels again.

METHOD FOR ADJUSTING THE PARKING BRAKE

Ask your Komatsu distributor for the adjusting.

METHOD FOR CHECKING OIL LEVEL IN PTO GEAR CASE, ADDING OIL

Immediately after the engine is stopped, its parts and oil are still very hot and may cause burn injury.
Accordingly, wait until they have cooled down before starting the work.
4-64
k k
WARNING
WENAM00061
MAINTENANCE