SPECIFICATIONS Model: DUB184 Capacities Air volume 0 - 13.0 m /min Air speed (average) 0 - 43.2 m/s Air speed (max.) 0 - 52.1 m/s Overall length (with front nozzle) 825 mm Rated voltage D.C. 18 V Net weight 2.5 - 3.0 kg •...
• Do not use nozzles other than the nozzles Do not wear loose clothing or jewellery that provided by Makita. can be drawn into the air inlet. Keep long hair Do not use the blower to inflate balls, •...
Page 4
If the blower is damaged, ask Makita tions. Charging improperly or at temperatures Authorized Service Centers for repair. outside the specified range may damage the battery and increase the risk of fire.
Page 5
► 1 . Screw Tape or mask off open contacts and pack up the battery in such a manner that it cannot move Make sure that the Makita logo on the front nozzle around in the packaging. is facing the direction shown in the figure, and then When disposing the battery cartridge, remove attach the front nozzle to the machine.
Tighten the screws with the hex wrench. Attaching the shoulder strap Optional accessory CAUTION: Be sure to attach the hooks of the shoulder strap to the machine securely. If the hooks are attached incompletely, they may come off and cause an injury. CAUTION: Be sure to use the shoulder strap dedicated to this machine.
Indicating the remaining battery capacity FUNCTIONAL DESCRIPTION Only for battery cartridges with the indicator CAUTION: Always be sure that the machine is switched off and the battery cartridge is removed before adjusting or checking function on the machine. Installing or removing battery cartridge CAUTION: Always switch off the machine...
MAINTENANCE CAUTION: Always be sure that the machine is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. ► 1 . Control lever 8 ENGLISH...
Cleaning the machine Clean the machine by wiping off dust with a dry cloth or one dipped in soapy water and wrung out. NOTICE: Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may result. Remove dust or dirt from the suction inlet at the rear of the machine. ► 1 . Suction inlet Storage The hook hole on the bottom of the machine is conve- nient for hanging the machine from a nail or screw on...
Remove the battery immediately! OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita prod- uct specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regard- ing these accessories, ask your local Makita Service Center.