Table of Contents
Advertisement
1.
Access the serial console configuration interface via Hyperterminal or
other text-based console program.
2.
Assign (or enable/disable) the desired protocols and their
characteristics to the specific communication ports.
3.
Perform the desired per-protocol mapping and definition assignments
for each point, including the name, timeout and "source port"
assignments.
4.
Exit the serial console, which will prompt you to update the gateway's
internal configuration file and then reboot the unit.
5.
Download a copy of the unit's configuration file to your PC for backup
purposes.
Of course, it is possible to simplify or even eliminate some of these steps by
starting your configuration from a pre-existing point database file (either
downloaded from the internet or previously-created by the user), and then
simply modifying those elements necessary to match your application.
29
Advertisement
Table of Contents
